36-46
Rubber
Negro
PU injection
Internal Fibertech 1.5 mm, antifungal / External: (EVA) lined with polyester fabric in circular fabric 4 mm caliber.
Fully covered in 1.8-2.0mm brown Nubuck leather, 100% polyester flat weave on the neck and sides.
Made with 100% textured polyester knit fabrics with a 4 mm gauge foam supplement, puffed with a 10 mm gauge polyethylene foam sheet and 100% polyester non-woven fabric that provides comfort to the shoe.
Made with line polyurethane (PU) sole, monocolor (black), non-slip, waterproof, flexible, thermal insulating, specially formulated with excellent resistance to hydrocarbons and excellent dielectric properties. External floor hardness 55-65 shore A.
Abrasion resistance of the sole: STANDARD: ISO 4649 / REQUIREMENTS: Maximum 300 mm3 / 70 mm3.
Sole flexion: STANDARD: COVENIN 39:2003 / REQUIREMENT: Maximum increase of 4 mm in 30,00 real cycles evaluated at 70,000 cycles.
Mechanical resistance of the toe cap: STANDARD: DIN EN 12568 / REQUIREMENT: Minimum residual height of 20 mm. After 200 J impact and 15 KN compression.
Dielectric resistance: STANDARD: ASTMF 2412 and 2413 of 2005 / REQUIREMENT: Maximum of 50 N/mm force applied to detach them.
Dielectric resistance: STANDARD: ASTMF 2412 and 2413 of 2005 / REQUIREMENT: Maximum of 50 N/mm force applied to detach them.
It is recommended for electrical maintenance work and dry environments, since humidity is electrically conductive. General use on oils, mining, food factories, agro-industrial sector.
6 months of continuous use in heavy-duty environments for which it has been designed.
Remove dirt with a soft-bristled brush and clean regularly by applying shoe polish. Verify carefully that the model meets your security needs. Do not continuously subject to conditions of critical humidity, temperature or bacteriological chemical oils.
Do not use the footwear while wet, or for unspecified activities, dry the footwear at room temperature and shade, never place the footwear next to intense sources of heat.